MOTOROLA MOTO E6I won’t turn on (7 Solutions)

If your MOTOROLA MOTO E6I won’t turn on, here’s why your MOTOROLA MOTO E6I won’t turn on, and 7 possible ways to fix this problem.

Why won’t my MOTOROLA MOTO E6I turn on?

The main cause of an MOTOROLA MOTO E6I not turning on may be due to software or battery related issues. Whatever the case, this can be disappointing. However, there are other issues that can prevent your MOTOROLA MOTO E6I from turning on. Some of these include:

Outdated software Your MOTOROLA MOTO E6I’s software may be outdated, which means that the drivers need to be updated. As a result, there will be interdependencies where the entire system will crash if one part of the system crashes. In this case, it is necessary to update the driver and install them again. This can fix many problems within your device and make sure it is working properly.

Hardware related problems Hardware, such as the battery, may be damaged beyond repair, such as leaking or other physical damage. This can be the result of charging the MOTOROLA MOTO E6I too much or dropping it and causing damage to it. In this case, you’ll need to replace the hardware to fix it. If your battery is damaged, be sure to replace it immediately. Once the battery is replaced, you can safely restart the MOTOROLA MOTO E6I and continue using it.

What to do if MOTOROLA MOTO E6I won’t turn on?

If you are wondering, «What to do when an MOTOROLA MOTO E6I won’t turn on?», this guide is for you. It can be due to many problems that prevent your MOTOROLA MOTO E6I from turning on. The following are possible solutions that can help solve the problem.

1. Check if the MOTOROLA MOTO E6I is charged

As is often the case, the most obvious cause is usually the right one. If you haven’t noticed any signs of your MOTOROLA MOTO E6I malfunctioning before, the problem could be as simple as a lack of charge in the battery. To solve this problem, try the following tips.

Check the connections First of all, check the obvious points. Have you remembered to charge the MOTOROLA MOTO E6I? Is the charger partially detached from the power outlet? And is the power outlet turned on?

Clean off dirt and dust Next, make sure there is no dust, dirt or other impurities clogging the USB port of the charging cable or the charging port of the MOTOROLA MOTO E6I. Remember that connections are delicate. The best way to remove dirt from the ports may be to use a can of compressed air.

Check the cable USB charging cables are notorious for malfunctioning on a whim. You can check the integrity of your cable by using it with another device and seeing if it works.

If your MOTOROLA MOTO E6I won’t turn on even after charging, read on.

2. Power cycle the MOTOROLA MOTO E6I

We’ve all experienced a frozen phone. The screen doesn’t respond and none of the buttons work. But did you know that it’s also possible for an MOTOROLA MOTO E6I to freeze when it’s turned off?

If your MOTOROLA MOTO E6I won’t turn on, one solution is to perform a power cycle. Press and hold the MOTOROLA MOTO E6I’s power button for several seconds. You may need to hold it for 10 to 30 seconds.

3. Check the MOTOROLA MOTO E6I battery

If your MOTOROLA MOTO E6I has died and won’t turn on or charge, but you’re sure your charging equipment is working and a power cycle hasn’t solved your problems, it’s time to turn your attention to your MOTOROLA MOTO E6I’s battery. It could be the reason why your MOTOROLA MOTO E6I won’t turn on.

Most phone and tablet batteries start to lose quality quickly after a few years of use. Eventually, they run out of power completely. Other types of damage can also irreparably affect the battery. Liquids, drops on hard surfaces and extreme temperatures can render a battery useless.

Check that the battery is receiving power. After plugging the MOTOROLA MOTO E6I into the charger, wait a minute to see if the battery icon appears on the screen.

If it does, the battery is fine and you can proceed with the next steps. Alternatively, you may see a small red (or other colored) light flashing. If so, it means that your battery does not have enough power to turn on or display any content on the screen. Let it charge for 30 minutes and try again.

Don’t see the battery icon or a light? That could mean your battery is dead and needs to be replaced.

4. Check the MOTOROLA MOTO E6I screen

You may be frustrated that your MOTOROLA MOTO E6I won’t turn on when, in fact, it may be on without you even realizing it. A cracked screen can give the impression that there’s no power.

Fortunately, it’s easy to tell if the screen is the culprit. Press and hold the power button for 30 seconds to make sure the MOTOROLA MOTO E6I turns on for good, then wait at least two minutes for the boot process to complete.

Now, call yourself from another phone. If the MOTOROLA MOTO E6I beeps, your screen is to blame. Remember that sometimes you can replace the screen yourself, but it will void the warranty.

5. Use a computer to turn on the MOTOROLA MOTO E6I

If you still can’t turn on your MOTOROLA MOTO E6I, you may be able to force it on your computer. Google provides a somewhat convoluted series of steps you can follow. We’ve simplified them below:

Connect the MOTOROLA MOTO E6I to the computer using a USB cable.
Let it charge for 15 minutes.
Disconnect the cable from the MOTOROLA MOTO E6I (not the computer).
Reconnect the cable within 10 seconds of disconnecting it.
Charge MOTOROLA MOTO E6I for another 30 minutes.
Press and hold the power button for five seconds.
Press Reset on the screen.
If Reset doesn’t appear, press and hold the power button for an additional 30 seconds.

6. Factory Reset (erase data) MOTOROLA MOTO E6I

If connecting your MOTOROLA MOTO E6I to a computer has not solved your problem, then performing a «Factory Reset» may work. This technique requires you to first reboot your MOTOROLA MOTO E6I into recovery mode and then perform a «Factory Reset». Remember that this method will erase all the data on your MOTOROLA MOTO E6I, so do it only if you are willing to risk losing your data.

Here’s how to fix MOTOROLA MOTO E6I won’t turn on at all with a factory reset:

Step 1: Enter your MOTOROLA MOTO E6I into recovery mode after turning it off.
To do this, you have to press «Volume Down + Power» at the same time. Keep holding these buttons until the MOTOROLA MOTO E6I logo appears and the MOTOROLA MOTO E6I restarts again. Step 2: Now, you can factory reset your MOTOROLA MOTO E6I.
Use the «Volume Down» button to scroll up until the «Factory Reset» or «Wipe Data» option appears.
Press the «Power button» to select it.
When you are done, use the «Power Button» to choose «Reset System» now.

7. Your MOTOROLA MOTO E6I might be unusable

If none of the above has worked, it may be time to face the reality that your MOTOROLA MOTO E6I won’t turn back on and you need a new phone. Remember that some phones are specifically designed for use in dirty or difficult areas. If you find that you keep encountering stuck ports, one of these devices might be the best solution.

Conclusion

It’s incredibly frustrating when you want to use your MOTOROLA MOTO E6I and the phone won’t turn on, so you can’t use it. Fortunately, there are several proven solutions:

1. Check if the MOTOROLA MOTO E6I is charged.
2. Power cycle the MOTOROLA MOTO E6I
3. Check the MOTOROLA MOTO E6I battery
4. Check the MOTOROLA MOTO E6I screen
5. Using a computer to turn on the MOTOROLA MOTO E6I
6. Factory reset (data erase) the MOTOROLA MOTO E6I
7. Your MOTOROLA MOTO E6I may be unusable

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *